Precision Linear & Angular Accelerometers

All Jewell force-balanced (servo) precision accelerometers are fully self-contained. They connect to a DC power source and a readout or control device for a complete operating system. The output is a high-level DC signal proportional to acceleration and tilt angle sine from as little as ±0.010g to ±20g full range. Jewell precision accelerometers respond to change in velocity as small as 1µg. Hysteresis less than 0.0005% of full range output and vibration rectification less than 50µG/G2 are available.

Inertial Sensor Catalog

Angular Accelerometers

Linear Accelerometers

Digital Accelerometer

Angular AccelerometersLinear Accelerometers

Angular Accelerometers
ASB Series ASMP Series ASXC Series
ASB Angular Accelerometer Compact Angular Accelerometer Sensitive Angular Accelerometer
• Bandwidths to 200 Hz
• IP68 Seals
• Available 28V Aircraft Input
• Connector or Pin Config
• Aerospace Quality / Reliability
Download Datasheet (PDF)
• Bandwidths to 200 Hz
• 1.05″ Cube Housing Size
• ± 15 Std Input Voltage
• Aerospace Quality / Reliability
Download Datasheet (PDF)
• Std Input Ranges 1 to 100 rad/sec sq
• Resolution >0.001 rad/sec sq
• Very High Output to Size Ratio
• Seft-test for >95% Fail Detect
• -30°C to +70°C Operating Temp Range
Download Datasheet (PDF)

Compare Accelerometers Where to buy Force Balanced Accelerometers

Custom Solutions and Capabilities for Accelerometers Accelerometer Options & Accessories

Back to Top

Single-Axis, Linear Accelerometers
LCA-100 Series LCF-200 Series (Fluid-damped) LSMP Series LSB Series
 Linear Analog Accelerometer Single Axis Linear Accelerometer Compact Linear Accelerometer Analog Linear Accelerometer
• Built-in Output Filter
• DO-160 Qual Versions
• Available 28V Aircraft Input
• Connector or Pin Config
• 0.20% 10-year Scale Factor
Download Datasheet (PDF)
• ± 0.5g to ± 5.0g Full Range
• Filtering 5 to 100 Hz Bandwidth
• Exeptional Bias & Scale Factor
• High Level  ± Vdc Output
• 1,500g Shock Capability
Download Datasheet (PDF)
• ± 0.5g to ± 20.0g Full Range
• Filtering up to 200 Hz Bandwidth
w/0.6 Damping
• Satellite Application Reliability
• > 20 µg Res @ 10g Full Scale
• -55°C to +95°C Operating Temp Range
Download Datasheet (PDF)
• ± 0.5g to  ± 20.0g Full Range
• Filtering up to 200 Hz Bandwidth
w/0.6 Damping
• Satellite Application Reliability
• >20 µg Res @ 10g Full Scale
• -55°C to +95°C Operating Temp Range
• Meets AREMA/CENELEC Standards
Download Datasheet (PDF)
LSBC-R Datasheet (PDF)

Compare Accelerometers Where to buy Force Balanced Accelerometers
Custom Solutions and Capabilities for Accelerometers Accelerometer Options & Accessories
Back to Top

Single-Axis, Linear Accelerometer Dual-Axis, Linear Accelerometer Tri-Axis, Linear Accelerometer Digital Linear Accelerometer
SMA Series LCF-2530 Series (Fluid-damped) LCF-3500 Series (Fluid-damped) DXA-100/200 Series (Fluid-damped)
Economical Servo Accelerometer  Dual Axis Linear Accelerometer  Triple Axis Linear Accelerometer  Single & Dual Axis Digital Accelerometer
• ± 0.25 to ± 2.00g Full Range
• Dual-Ended Power Input
• ± 5 VDC Output
• IP65 Seal
• Resolution 3.5 µG
• RoHs Compliant
• Lower cost than most force balanced sensors
• SMA Datasheet (PDF)
• ± 0.5g to ± 2.0g Full Range
• Filtering 5-100 Hz Bandwidth
• Exeptional Bias & Scale Factor
• High Level ± Vdc Output
• 1,500g Shock Capability
• Bi-Axis
• Download Datasheet (PDF)
• ± 0.5g to ± 5.0 Full Range
• Filtering 5 to 100 Hz Bandwidth
• Exceptional Bias & Scale Factor
• High Level ± Vdc Output
• 1,500 Shock Capability
• Tri-Axis
• Download Datasheet (PDF)
• ± 0.25 to ± 2.00g Full Range
• RS485 and RS422 Outputs
• Mechanical Shock 1500g 1 msec ½ sine
• Resolution to 8 µG
• Meets AREMA/CENELEC Standards
Download Standard Datasheet (PDF)
• DXA-100/200-R Datasheet (PDF)
Quick Start Guide (PDF)
Contact us for the DXA software

Compare Accelerometers Where to buy Force Balanced Accelerometers
Custom Solutions and Capabilities for Accelerometers Accelerometer Options & Accessories
Back to Top