Page 103 - Jewell Geophysical - Geotechnical Instrument Catalog
P. 103

Model C801 “Tuff Tilt 420” Tiltmeter

The model C801 “Tuff Tilt 420” delivers the
same precision and durability of our A801, but
with 4-20mA output. Units are available in
single axis (uniaxial), and dual axis (biaxial) tilt
configurations. The Tuff Tilt 420 is current loop
powered, so tilt measurements are made using
an economical 2-wire pair, and because output
is 4-20mA there is no signal loss over long
cables. Units also include an on-board
thermistor for temperature measurements. All
units are rated IP65 waterproof for advanced
protection from the elements. Use the C801 for
structural monitoring, 4-20mA PLC systems,
industrial measurement and control, or
anywhere long cable runs are necessary.

                             High-Gain                       Standard                           Wide-Angle

Angular Range                ±0.5°                           ±3.0°                              ±50°

Resolution                   <0.0001°                        0.0006°                            0.01°

Repeatability                <0.0002°                        0.001°                             0.02°

Non-Linearity                1% 2% 0.5%

Scale Factor                 0.0625°/mA               0.375°/mA                                 6.25°/mA

Kz Temp Coefficient (deg/C)         ±0.0002°/°C (typical)                                 ±0.002°/°C (typical)

Ks Temp Coefficient (%/°C)              <0.04%/°C (typical)                                    <0.1%/°C (typical)

Time Constant                                                0.15 sec

Output                                                4-20mA Two-wire current loop (per axis)

Channels                                              Tilt, Temperature

Output Impedance                                             270 ohms

Temperature Output                       0.1°C/mV typical (single ended; 0°C = 0mV)

Power                                    (0.02 Ampere x R + 10 VDC) < Vs < 29 VDC

Environmental                                         -40 to +85°C operation and storage. IP65

Dimensions                                            120 x 80 x 60 mm, 0.5 kg (1.1 lb.)

Materials                                             Diecast painted aluminum,

Cable                        3m (10 ft.), 5-conductor + one overall shield, PVC jacket, tinned ends

                    Specifications subject to change without notice on account of continued product development

Ordering Code:                                        Accessories:

                                                      Part No. Description

                                                      81439            Mounting bracket for vertical surfaces

                                                      84051            Mounting plate for horizontal
                                                                       surfaces

                                                      70369            6-conductor cable
                                                                       (specify total length on order)

                                                      62204            Optional 6-pin male receptacle
                                                      62202            (installed on tiltmeter cable)
                                                                       Optional 6-socket in-line plug
                                                                       (mates to P/N 62204 connector)

                      Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103
            sales@jewellinstruments.com • www.jewellinstruments.com • Tel (800) 227-5955

                                                                                                                                                           L00255 Rev. C
   98   99   100   101   102   103   104   105   106   107   108